Engine: 10 p of the air-cooled power diesel engine

Kettle body internal structure, frame structure, the tank cover board insulation board insulation between the two, the double helix kettle tank heating system

Hydraulic drive system: stainless steel shell, upright oar chip stirring

Energy devices itself has energy exhaust device to prevent energy loss

Hydraulic transmission system, hydraulic two-way stepless stirring, motor BM315

The hydraulic oil tank: 0.063 m after

Tank: 0.095 m after

Heating system: American diesel stove, equipped with intelligent temperature control system can automatic ignition stall

Inside the kettle capacity: 0.815 m after, can load 1.5 T hot melt coating

Size and weight: 1.85 * 1.2 * 2.15 m (cylinder) 1150 kg (cylinder)

Equipment characteristics:

Equipped with ignition device, automatic ignition: equipment, key can open furnace fire, without a source.

Second, the bottom of the pot life of long life: the new combustion chamber heating, around the bottom of the pot and uniform heat, heat absorption area of hot melt kettle increased 3.5 times than the ordinary, solve the previous disadvantages one-side heated a pot, pot, do not damage deformation, the pot material not withered.

Three, intelligent temperature control: set temperature, when temperature is below the set temperature stove automatic ignition, temperature more than set point stove automatic flameout, constant temperature thermal insulation system can reduce the unnecessary waste of diesel, save energy.

Four, fuel-efficient: imported temperature control stove, diesel while working efficient atomization combustion without black smoke, can make full save diesel.

Five, the coating capacity: a single cylinder filled with 1.5 tons, the large capacity discharge quickly.

Six, small volume: 1.5 tons of single cylinder reactor compared to the original 1.2 tons of duplex hot melt reactor area account for 25% of the small car. Diesel heating without carrying liquefied gas tank. Paint can be piled up extra space, greatly increased the construction efficiency.

Seven, single cylinder = duplex: kettle decent board have both before and after feeding mouth, equivalent to two clean window, yellow to white material, workers long handle the shovel quick clean up the yellow material are available, and change the disadvantage of the use white material to heat replacement time-consuming and cost. You do not need to clean up when white material in yellow.

Eight, melting speed: first time about 1.5 hours of heat engine, burn every 4 minutes out of the 100 kg material, after the expiration of the discharging speed construction with high efficiency.